A: "Just a heads up, if I sound like I have a speech impairment it's because I'm wearing an expander"
B: "An expander??"
A: "Yeah, a jaw expander."
B: "A what?"
A: "Oh... it's because I'm getting braces soon"
B: "What?!?! But your teeth aren't even bad..."
Have anyone experienced a similar conversation like this? I have... a few times now. At first, I thought people were just being nice by saying that my teeth didn't look that bad. However, the volume of these responses have been increasing as of late. It must be noted here that there are have also been many who don't say this and happily agree that braces is the way to go. However, as time goes on and I ponder about it more, I finally came up with a few reasons why people might have responded in this manner:
1. My severely rotated canines are very noticeable but my lower lip covers them when I smile. Hence, no one notices them.
2. I have lived with these teeth for 22 years and have seen them everyday. Hence, not everyone sees them (and notices how bad they are) everyday.
3. No one (that I know of) is obsessive with teeth as I am. Since starting treatment I've started to notice how bad (and good) some people's teeth are. Hence, no one obsesses and notices my teeth like I do.
4. People are actually just being nice because there aren't many responses one can say after someone tells you that they're getting braces. I've gotten a few "nice..." or "braces are expensive right?" responses though. Hence, there are too much nice people.
5. My teeth aren't that bad. Although I think they are. Hence, my negativity is the problem.
Whatever the reason, I have to admit that it nice to hear from people that they previously didn't think that my teeth were THAT bad looking. Cheers to those individuals!
Saturday, February 4, 2012
Saturday, January 28, 2012
Another expander?
The title tells the whole story. It's possible and very likely that I am going to get fitted for another RPA. The reason is because my teeth have not moved as far as was initially hoped. Although they have moved approximately 10 mm so far, it is not far enough. This is especially relevant to my left side, which you can see from previous pictures that its movement are much slower than that of the right side.
Currently, I'm still turning my RPA but I should be done soon. I'm not sure how I'll know when to stop. I'm hypothesizing that either there won't be a hole for me to insert the stick or the stick will get stuck when I try to turn.
I was feeling a little bummed out when I was first told the news. I don't know after a few months I was kind of anticipating braces. Maybe I'm dorky but I was excited to know that I was getting braced. Oh well. I will be braced eventually.
Currently, I'm still turning my RPA but I should be done soon. I'm not sure how I'll know when to stop. I'm hypothesizing that either there won't be a hole for me to insert the stick or the stick will get stuck when I try to turn.
I was feeling a little bummed out when I was first told the news. I don't know after a few months I was kind of anticipating braces. Maybe I'm dorky but I was excited to know that I was getting braced. Oh well. I will be braced eventually.
Monday, January 9, 2012
Happiness for change.
Happy 2012 everyone! Just thought I get that out of the way first. Now onto the teeth.
Above are pictures showing the distance that my RPA has moved so far. It's approximately >7mm at the moment. As I've mentioned before, the average maximum distance is approximately 10 mm. My guess at this point is that I will finish turning the full 10 mm in early February. Hopefully by then I will finally be braced.
Nevertheless before the braces I'm going to have to get both my bottom two first pre-molars removed. This is because I need to create the appropriate space for my crowded canine teeth to turn back into their positions. I heard that canines are the hardest type of teeth to move due to their long roots. This is interesting because during my initial consultation with the orthodontist he commented on how long all the roots on my teeth were. At the time, I wasn't sure if it was a compliment or not so I just smiled back at him. For those who may be curious, the picture on top of the blue x ray are not of my teeth. I found that on google.
| Turn #2 |
![]() |
| Turn #34 |
Above are pictures showing the distance that my RPA has moved so far. It's approximately >7mm at the moment. As I've mentioned before, the average maximum distance is approximately 10 mm. My guess at this point is that I will finish turning the full 10 mm in early February. Hopefully by then I will finally be braced.
Nevertheless before the braces I'm going to have to get both my bottom two first pre-molars removed. This is because I need to create the appropriate space for my crowded canine teeth to turn back into their positions. I heard that canines are the hardest type of teeth to move due to their long roots. This is interesting because during my initial consultation with the orthodontist he commented on how long all the roots on my teeth were. At the time, I wasn't sure if it was a compliment or not so I just smiled back at him. For those who may be curious, the picture on top of the blue x ray are not of my teeth. I found that on google.
So far, my experiences feel as if I'm taking a small road trip just before I venture on a grand journey. Five months with the RPA before I can finally get braces. However, time is flying by. To get by I have the habit of always imagining the end result (having a Hollywood smile hehe), which always gives me the motivation to keep turning my RPE. For those who are currently using an RPE or have been lucky enough to have used one (sarcasm), you probably know what I mean. Every other week or so when I turn it and notice the very little movement that has occurred I can't help but smile to myself. I don't think this type of happiness can be replicated often --- happiness for change.
Thursday, December 22, 2011
Say hello to my little gap.
First off, I want to apologize to those who read my blog. Due to a hectic schedule involving final exams and assignments, I was not able to find time to blog. However, I'm finally on holiday break and now have all the time in the world.
So, what have I been up this past month (besides studying)?
There are a couple of good news. I'll start with the "little" good news. My RPA is currently measured at 7 mm! This is 7mm out of a possible 10mm. Although not everyone needs to expand the full 10mm, it's seems like I will have too. For a matter of fact, I was told I have too. If I could estimate correctly, I still have to turn for another month and a half (finally seeing light at the end of the tunnel!) This is not bad since I'm used to turning the RPA now. However, I have been getting headaches lately. I'm not sure if this is correlated to the having to turn the RPA, which puts force upon the nasal area when turned, or it's due to many late nights studying. I'll have to monitor this situation and update if necessary.
From the pictures below, there has been a bit of movement during this last month. My right side is still in the lead in terms of movements. The left side, however, has gained some ground but nevertheless still behind. It hasn't be able to "jump over the hump" yet. Take a look for yourself:
Now for the "big" good news. Although many may not consider it news but I am very excited and proud of it. Since last month there has been noticeable gaps on the teeth adjacent to my front teeth. Indeed I was happy about it because having gaps mean the RPA is doing it's job correctly. Nevertheless, I keep wondering if my two front teeth themselves would separate at all. Two weeks ago, they heard me (and replied). There is finally a noticeable gap (although small) between my front teeth! Flossing has been easy in that area as of late. Having a gap between the front teeth means good news in the world of RPAs. For those of you who are afraid though, don't be. The braces will close any gap you may have that resulted from a RPA.
Lastly, I want to wish my three followers and everyone who reads my blog a Merry Christmas, Happy Hanukkah, Happy Kwanzaa, and/or any other holidays that are being celebrated during this festive time :D
So, what have I been up this past month (besides studying)?
There are a couple of good news. I'll start with the "little" good news. My RPA is currently measured at 7 mm! This is 7mm out of a possible 10mm. Although not everyone needs to expand the full 10mm, it's seems like I will have too. For a matter of fact, I was told I have too. If I could estimate correctly, I still have to turn for another month and a half (finally seeing light at the end of the tunnel!) This is not bad since I'm used to turning the RPA now. However, I have been getting headaches lately. I'm not sure if this is correlated to the having to turn the RPA, which puts force upon the nasal area when turned, or it's due to many late nights studying. I'll have to monitor this situation and update if necessary.
From the pictures below, there has been a bit of movement during this last month. My right side is still in the lead in terms of movements. The left side, however, has gained some ground but nevertheless still behind. It hasn't be able to "jump over the hump" yet. Take a look for yourself:
| Left side |
| Right side |
Now for the "big" good news. Although many may not consider it news but I am very excited and proud of it. Since last month there has been noticeable gaps on the teeth adjacent to my front teeth. Indeed I was happy about it because having gaps mean the RPA is doing it's job correctly. Nevertheless, I keep wondering if my two front teeth themselves would separate at all. Two weeks ago, they heard me (and replied). There is finally a noticeable gap (although small) between my front teeth! Flossing has been easy in that area as of late. Having a gap between the front teeth means good news in the world of RPAs. For those of you who are afraid though, don't be. The braces will close any gap you may have that resulted from a RPA.
Lastly, I want to wish my three followers and everyone who reads my blog a Merry Christmas, Happy Hanukkah, Happy Kwanzaa, and/or any other holidays that are being celebrated during this festive time :D
Subscribe to:
Posts (Atom)
